 * |   |
|
Molbiol.ru | О проекте | Справочник | Методы | Растворы | Расчёты | Литература | Орг.вопросы Web | Фирмы | Coffee break | Картинки | Работы и услуги | Биржа труда |  Zbio-wikiNG SEQUENCING · ЖИЗНЬ РАСТЕНИЙ · БИОХИМИЯ · ГОРОДСКИЕ КОМАРЫ · А.А.ЛЮБИЩЕВ · ЗООМУЗЕЙ Темы за 24 часа [ Вход* | Регистрация* ] Форум: |
|
Правила
* Introduction to CNC Lathes
Операции: Хочу стать куратором* · Подписаться на тему* · Отправить страницу по e-mail · Версия для печати*
Внешний вид:* Схема · [ Стандартный ] · +Перв.сообщ.
   |
 supkill124Участник  |
  19.10.2021 04:09
To help you better understand what each tool is about and how you can use them, we will be starting a new series on the basics of CNC Machine Tools. In this article, we will focus on CNC Lathe Machines, covering the following: Considered the workhorses of the manufacturing sector, lathe machines have been around ever since the 19th century. Unlike its predecessors, today’s CNC Lathes are much more sophisticated and automated. Operated with Computer Numerical Control (CNC) systems and provided with precise design instructions, CNC Lathes are machine tools where the material or part is clamped and rotated by the main spindle, while the cutting tool that work on the material, is mounted and moved in various axis. CNC Lathes are normally used for machining parts, where the material / part is clamped and rotated whereas the cutting tool is stationery mounted for OD (Outer Diameter) and ID (Inner Diameter) operations, e.g. shafts and pipes. They are ideal for parts that have same symmetry around an axis that could be chucked up (i.e. radially clamped) in the spindle. A simple CNC Lathe operates on 2-axis and the tool is located in a fixed position at 8 to 24 station turret. The rotating action of the part is called “turning”, hence certain types of CNC Lathes are called CNC Turning Machines. Milling (cutting tool moves around stationery workpiece), boring and tapping (a tool that cuts threads inside hole) tools are normally driven by a separate drive system inside the turret. Depending on the application, the life tools (i.e. active tool) are mounted for axial or radial operational directions. These could be found in 3-axis CNC Lathes or CNC Turning Machines. Lathe machines with additional options such as Y-axis, sub-spindles, or specific selected options for automation are commonly called Turning Centres. These sophisticated machine tools are capable of machining complex parts – these go beyond standard OD & ID turning operations and may incorporate milling, drilling and tapping operations to complete the part in one setting. Taking a piece from raw part to finished product, such all-in-one machine tools significantly improves productivity. |
|
guest: 123goal IP-штамп: fr4iy3.kHUw02 гость |
02.11.2021 09:45
It is an educational article that provides a thorough knowledge. And improve reading skills Make it relax and have fun Stylish Make readers gain knowledge and be able to use them to benefit. I want the author to make more articles like this, thank you. This article was written with evidence of facts. Interesting and in the content The author has inserted a critical comment. And creativity Content and expressions in language are suitable for general readers, not specific. There are ways to invite them to read. Read and challenge your mind. |
|
harki Постоянный участник |
13.12.2021 13:26
|
| « Предыдущая тема · Организация работы группы/лаборатории · Следующая тема » |
 |
· Викимарт - все интернет-магазины в одном месте · Доска объявлений Board.com.ua ·
--- сервер арендован в компании Hetzner Online, Германия ---
--- администрирование сервера: Intervipnet ---
Хеликон · Диаэм · ИнтерЛабСервис · Beckman Coulter · SkyGen · ОПТЭК · BIOCAD · Евроген · Синтол · БиоЛайн · Sartorius · Химэксперт · СибЭнзим · Tecan · Даниес · НПП "ТРИС" · Биалекса · ФизЛабПрибор · Genotek · АТГ Сервис Ген · Биоген-Аналитика
Powered by Invision Power Board(Trial) v2.0.0 © 2024 IPS, Inc.